New Sweater Pattern and Yarn Overs to Learn

Figuring out how to knit the yarn over eyelets for the Blueberry Vodka Lemonade sweater knitting pattern.

These days I find most of my new knitting projects while browsing Instagram. I’m pretty clueless about the tech side of Instagram, but I have found some very interesting patterns.

The Blueberry Vodka Lemonade pullover is the newest, and I have just cast on to knit it. This pattern is by designer Thea Colman, aka Baby Cocktails, and it is a raglan style with a wide collar and eyelets down the sides of the sleeves.

It calls for a fingering weight yarn and I have chosen to use Sandnes Garn Tynn Peer Gynt. A mouthful, but a beautiful wool that comes from Norway. It is a bit thin, so I had to go down a needle size to get gauge.

Two firsts here for me: I’ve never knit anything by this designer. The pattern is one of the best I’ve ever followed. It’s 9 pages long, and full of good info needed to successfully knit the project. I did have some trouble in the beginning and had to begin again, but it was totally my own fault for not paying attention.

Sandnes Garn Tynn Peer Gynt fingering wool yarn
Pretty black wool
knitting the yoke of a sweater in black wool
Short rows have been completed and I’m on to knitting my way down the yoke.

Help on Knitting the Eyelets

This sweater has eyelets, or little holes, along the edges of the sleeves. To create them, you must be familiar with yarn-overs. And I was not! I never knit much of anything that calls for yarn-overs, but I have done them before. I needed a refresher.

The YouTube video from Purl Soho is very good and covers all the ways a yarn-over is made. But the pattern yarn-overs are made at stitch markers so a “slip marker (sm)” is included, and that is where I got confused.

For instance, the directions will say, “Yarn over, slip marker, purl”. What this means is to do the yarn over (forward) and it will be on the needle before the marker. Then the marker is slipped, and when the purl is done – by wrapping the yarn back around the needle (watch that Purl Soho video if you need to), that purl strand must stay on the needle to the right of the marker. Not doing this throws off the stitch counts between the markers – the strand will be next to the purl when it should be behind the marker. I was doing it wrong, and it took me a few rounds to figure it out.

By the time I knew what I should be doing, my stitch counts for the back section and sleeves were off. I had to add in some stitches as I continued knitting.

So, the sweater is a big mess already… LOL. I already had to re-start this project, so onward I knit. My counts are good…the eyelets are a little off in some places, but …. It’s all good.

Knitting eyelets with yarn overs

I thought I would share this info just in case anyone else is having the same kind of trouble doing the yarn-overs.

I look forward to seeing how this sweater turns out. More to come about knitting this pattern.

balls of yarn graphic

Keep reading…

Something went wrong. Please refresh the page and/or try again.

If at First You Don’t Succeed

Beginning to knit a new sweater pattern called Blueberry Vodka Lemonade, but I messed up and must begin again. It happens.

The motto, “If at first you don’t succeed, try try again” is one I have in mind after casting on for a new sweater, knitting a bunch, and then goofing up badly. I was so looking forward to knitting this new sweater, but I’m not as good a knitter as I had hoped! After knitting all the way through the entire neck ribbing of a new sweater pattern…. I ripped the whole thing out.

It was totally my fault and not the pattern. In fact, this pattern is written better than any I think I have ever knit. Everything is explained in detail, with stitch counts, measurements, etc. to help the knitter. I’ve never knit a pattern by this designer (info below) but wow, I’m impressed…!

sweater neckband
Starting over

I will be starting again, but it is disappointing to get so far and then mess up. I had no hopes of going back and picking up the rib stitches because the yarn is black and difficult for me to see. It’s part of knitting life to make mistakes… it’s how we learn to fix them, or learn to deal with inevitable re-starts.

The Pattern

This new sweater pattern is named Blueberry Vodka Lemonade and is a design by Thea Colman, who is also known as Baby Cocktails in the knitting world. I love the look of this pullover knit in raglan style, with split hem, and 3/4 sleeves. My last project (the Lakeland Tee) also had a split hem, and I really like the look.

The Yarns I Chose

I searched for a while before I settled on two yarn types I wanted to try. I’ve never used either before.

First, a beautiful black, fingering yarn by Sandnes Garn: Tynn Peer Gynt, which comes from Norway. It is really lovely.

The gorgeous turquoise blue yarn is color “Peacock” and is Shetland wool from Harrisville Designs. Another beautiful yarn, which is spun in New Hampshire. I have visited Harrisville Designs, as I lived in NH for many years.

The Shetland seems a bit heavier for a fingering weight. On the other hand the Peer Gynt seems pretty thin.

skeins of wool yarn Shetland by Harrisville Designs, color Peacock and black Sandnes Garn Peer Gynt.
New yarn order

The Swatches

Because the pattern calls for a size 5 needle for the main part of the knitting, I did two different swatches with that size. Both were too large. So, I knit up a shorter swatch with the black yarn using a size 4 needle. It was perfect. Usually I knit a larger swatch but I didn’t want to use up the yarn.

(I had to wind the Shetland, by hand over my knees, and it was very easy to do so.). The black yarn does not need winding. I pulled from the outside.

Knitting swatches drying
Swatches

Messing Up and Making Changes

I want to follow this pattern as it is written, so I used a needle one size larger for the neckband. I knit all the way through the set up row – for the raglan and then my issues began.

When I re-knit this, and I will soon, I plan to switch to the smaller (main) needle on that “knit around one row”. I found it difficult to switch needles while knitting short rows and making the lacy parts at the raglan. I kept getting confused as to which needle I should be using. This is probably just me and my inexperience.. AND the fact that I did something really stupid. When I made the short row turn, I began following the wrong part of the directions (mark your place !!!! – I’m yelling at myself here).

Once I did it incorrectly – with the yarn overs and such, I totally could not go back without making a mess. AND that dark yarn didn’t help … so difficult to see.

Before I gave myself some kind of stroke, I just pulled the needles out and said, “Oh well, I guess I’ll start over”. Keep calm and carry on… and all that. I’ll cast on again later today.

If you plan to knit this sweater, you will need to be good at yarn overs (YO) as that is how the open holes along the sleeves will be made. Purl Soho has a nice, short, to-the-point video to help with that. See it here if you need help: https://youtu.be/n6Bpde5wihE

cat and yarn image

More Knitting Stories on the Blog

Something went wrong. Please refresh the page and/or try again.

Knitting the Lakeland Tee in Isager Palet

Knitting a summer tee pattern called “Lakeland” and using cotton yarn from Isager called “Palet”. This is my review.

I am finally knitting the Lakeland tee pattern (link to pattern at bottom of page) with short sleeves and a slight v-neck. This wonderful, easy pattern comes from designer Heidi Kirrmaier (link goes to her Ravelry pattern page). The Lakeland sample is knit in big blocks of color, but color choice is up to the knitter. Some knitters have done the top in one solid color. Others have used variegated yarn, or created stripes.

Isager Palet Cotton Yarn

Also, I am using a yarn I have never used before. Isager Palet is a cotton yarn with a flat strand and comes in variegated colors. I am using Ocean blue (5 skeins) as my main color and plan to use brown – color “Dunes” (1 skein) – further down the body for thin stripes.

Isager cotton Palet yarn
Isager Palet is a flat, cotton yarn

The Knitting Pattern

The pattern for the Lakeland top is very easy to follow. I have just separated the body and sleeves and will now continue down the body and add some brown color at some point.

The pattern begins with some back and forth, flat, knitting which raises the back of the top (there are no short rows), shapes the neck edge and marks out the sleeve areas. All directions are very easy to read and understand. I used four different color markers as the pattern suggested, which was helpful.

All increases made at the edges of the neck should be done carefully and correctly because this part of the top will be very noticeable when worn.

I’m going to do something different for the sleeves and make them shorter.

knitting Lakeland pattern tee
The Lakeland tee, knit with Isager Palet yarn.

Knitting With Isager Yarn

I began knitting this top using metal needles and it made the Isager Palet too slippery. I changed to wooden needles and was happier. The yarn is very easy to knit with. I also went up a needle size, and my stitch gauge was exact, but the rows were short.

The fabric created by the Palet yarn is very nice. It is light, and will probably be fairly cool and comfy in the Florida heat. And let me tell you, it’s been hot!

One thing that I’m having trouble with is the way this yarn comes off the skein. If I pull from the outside, I tend to get a bunch of strands that fall off the skein and get tangled. If I pull from the inside, I can’t find the end easily, and there is a tangled mess. So, I’m not sure which is best.

I’m more used to using wool, and changing colors and skeins is a bit weird with this yarn. It seems like it won’t stay put when “tucked in”, but I guess it will.

Creating the Stripes

About five inches down the body I began to add stripes. I am doing two rows of “Dune” brown, and then seven rows of “Ocean” blue. I really didn’t know how I would do the stripes. All I knew for sure was that I wanted them to begin below the boob line. I’m carrying the brown by catching it on each blue row so I don’t have to break it every time.

thin stripes knitting Lakeland tee
Lakeland pattern – beginning stripes on lower body

The body rib is 2×2 with a split hem. This means that one half of the hem is knit first, then the other half will be knit to leave a split at each side. I like this look, but have never done it. I’m using a size 4 needle – one size smaller than the 5 used for the main part of the tee. The pattern directions were a little confusing here, when they say to go down one size, but the US sizes listed are 4 and 2. I used a size 5 for the main part of the sweater, then a size 4 for the ribbing.

Needle Problems

Unfortunately, I discovered that the Lykke blue needles that I bought were too rough to use! I ended up using the Chiao Goo metal needle for the ribbing. But, even after sanding down the Lykke needle (for the price this should not be a thing), it measures larger than a size 4! Hmmmm… I bought it on Amazon, so maybe it is not a real Lykke (Amazon is not to be trusted at times). I’ve never had problems before, but this was very disappointing.

2x2 ribbing split hem knitting
Doing the ribbing on Lakeland

July 4th… Happy Independence Day my fellow Americans! Yesterday I tried on my Lakeland tee, once the ribbing section (half of it) was done. The garment fits perfectly! This is exciting, and makes me want to finish up my project.

  • Corrugated ribbing on sleeve
  • corrugated ribbing on sleeve
    Corrugated rib on sleeve
  • Lakeland tee knitting
  • Lakeland tee knitting
    One sleeve finished
Lakeland tee hand knit
Lakeland Tee finished!

In The End…

Great pattern. I may use it to knit this top again using a wool yarn and making long sleeves. I love the shallow, v-neck. I’m not crazy about this yarn – for a shirt. The yarn color selection is a bit bland, and the end product is too heavy for wearing in summer in Florida. I wish I had NOT changed the sleeves and simply made them shorter.

Lakeland Tee Pattern Page

wearing the Lakeland tee hand knit

I already have a new sweater knitting project in the queue – this time back to using wool. The yarn order is in and the Blueberry Vodka Lemonade pattern is purchased!

cats and yarn

Continue reading…

Ribbed Watch Cap Alternating Two Colors Invisibly

Starting a new little hat knitting project which is great for long car rides.

We were going camping. I needed a simple and small, knitting project for the two hour ride. I decided to use up some stash yarn and knit one more watch cap.

This pattern I used, for the third time, is the Ribbed Watch Cap and Beanie by Churchmouse Yarn & Teas. See the link to the pattern at the end of this page.

Because a small, size one needle is used, and there are many rows of 1×1 rib (knit one, purl one) this project can be a bit tedious, but it is just the thing for keeping hands busy. The completed hat is wonderfully wearable too.

two color ribbed watch cap knitting project
“Saffron” Yummy 2-ply by Miss Babs & “Turtle Haven” from Four Purls are the colors

All I needed was some fingering yarn – found easily in my stash. I chose orange and a variegated blue, both are fingering weight and Superwash merino. I’ve had these balls for a while.

Once again I did the Old Norwegian cast-on and not the involved tubular cast-on suggested in the pattern. I needed to get this project started because it was the day before my camping trip. I kept the cast on easy.

Making the Yarn Change Invisible

This time I am using two different yarn colors and changing color on each row. I am using the “yarn forward” (YouTube video), by Elizabeth Smith Knits. I learned this skein / color change hack when alternating skeins for the Arco Iris sweater. It is very simple to do and leaves no weird little squiggles when changing yarn – which is very important on this hat because it is knit on the wrong side and turned inside out when finished! This yarn change is invisible on both sides.

Photos below show both sides of the hat where I am changing yarns at the BOR marker.

invisible yarn color change each row
The yarn forward color change leaves no trace!

Camping Knit

Our campsite was on an island, and our site was directly on the saltwater river. Here I am doing some early morning knitting at the waters edge. Coffee, water view and knitting. What could be better?

Knitting the watch cap
Knitting at the edge of the river.

I know this will be an ongoing project that may take a while to finish, which is fine. Using two colors makes the knitting a bit more fun. I’m thinking that two very similar colors would work well. Maybe next time!

My hat will end up looking like this one.

Slouchy hat knitting is done
Slouchy Watchcap in blue

Get the pattern: The Ribbed Watch Cap and Beanie

Please keep reading