Second Time’s A Charm Knitting the Turkish Patterned Cap

Because my first Turkish Patterned Cap came out so pretty, not counting the trouble I had with the crown, I began knitting another one. Well, the second time’s a charm, but I felt cursed when I got to the crown.

I knew that my first attempt at knitting this hat was a fail when it came to the colorwork at the crown. I hadn’t even noticed that my troubles began not with the star, but way back at the first decrease row….! Now that I look closely at the blue hat, I see how off the patterning is at the top, before I got to the star.

Blue and brown versions of the hand-knit caps
Hat #1 and hat #2
hat knitting colorwork star at top of hat
Perfect “star” this time around

I began to make the same mistake once again, but caught myself on the second row of the crown. Originally, I thought the goof up was my fault, but it turned out to be the pattern. I had to painstakingly “tink” (knit backwards) or un-knit 1 1/2 rows and begin again. Do not simply follow the graph, or this will happen.

Reading charts is not my specialty and I can’t do lace or cable charts well, but hat charts are usually easy. In this instance, a slip1, k2tog, psso decrease is located at the beginning of the row, BUT if you do it there, the whole row of colors is off – that is because it uses the last stitch of the previous row along with the first stitch in the graph. Another knitter mentioned this as well, so it’s the pattern, not me.

You wouldn’t believe how long it took me to figure out how to fix this!

Crown star on Turkish Patterned cap
Blue star is a mess, white one is knitted correctly

Ever Had Your Needle Break Mid-knit?

Then, just as I thought I knew what to do to alter the pattern, my 16 inch circular needle came apart…! The needle tip just snapped off the cord….. time to freak out, but I remained surprisingly calm. Stitches were dropping off as there was no longer a needle holding them. I carefully laid all the work down and ran to get a new needle. Fortunately I managed to pick up all the stitches without much problem, but it could have been a big disaster.

broken knitting needle white knitting
Broken needle in the middle of knitting the crown! Knitter’s Pride – not happy!

The needle that broke was Knitter’s Pride brand. I liked that brand for the matching colors of the DPN’s and other needles, but to have the needle snap off the cord in mid-knit – sorry, won’t buy this brand again. I couldn’t have had this needle for more than a couple of years.

How I Altered the Pattern to Knit the Crown Correctly

  • Row 23 – first decrease round – Ignore the first Sl1, k2tog, psso decrease stitch (which begins the repeat) and simply knit it normally along with 3 more stitches in the same color, which would be the Main Color.
  • Continue on and do the colorwork for that first section of row 23 to align with the previous row to the end of the section.
  • The missing stitches at the beginning and end of the sections are used to make the decrease, so now – beginning on the 2nd repeat – do the decreases as marked.
  • If stitch markers were used during the colorwork body part of the hat, they will need to be moved back one, or removed.
  • Then, the end of the Row 23 round, do the decrease which should have been done in the beginning (per the pattern) – even though it goes into the next row.
  • Knit the non-decrease rows as directed, but do the same as Row 23 for every decrease row up the crown.
  • As long as you watch the colors on the chart and make them line up and do all the decreases (with the very first one coming last), you should be fine.

While knitting this hat, the braid at the cuff will curl. Once it is washed the brim lays flat. Mine was knit in DK yarn, but the pattern calls for worsted. I personally would go down a size – to a Medium – if using worsted.

Turkish Patterned Cap number two
Fresh off the needles! Time for a wash

Needle Size and Yarn

Needle size: 4US – Yarn: Miss Babs Kunlun in color “Naked”, and Wound Up Fiber Arts handspun variegated brown and purple. I began with pink but changed because it was too pink.

I had purchased the white yarn on sale from Miss Babs and had no idea what I would use it for. I’ll tell you it is a wonderful yarn. It’s made up of wool, cashmere and silk and is therefore very soft.

Wound Up Fiber Arts does not often have their handspun yarn for sale, but if I can ever come across it in new colors, I would buy more. I feel fortunate that I own the four skeins I have. I began with the variegated pink, but it was too pink for my liking, so I alternated with the brown for a few rows and then went totally brown. But the brown is variegated with purple, and a golden color. It’s such an interesting yarn.

Although I used the same type of yarn for hat #2, for some reason the brown hat seems a bit larger, but I don’t know why. These are the softest hats I’ve made and they will both be gifts to some young women I love.

Both Turkish Patterned caps hand knit with handspun
Hat one in blue, and hat two in brown and pink

I need to get myself a head form to dry my hats. In this instance I am using a tall votive candle holder covered with bubble wrap – hence the odd shape!

Knitting a Bohemian Version of the Marshland Sweater

This is my bohemian version of the Marshland sweater pattern by Tin Can Knits. The pattern is in their book “Strange Brew”.

Once again I am knitting with yarn I really don’t like all that much. I purchased this yellow Arranmore yarn when the color was on sale because it is / was discontinued. I planned to use it to make a different sweater (Big Love) and when that never happened, I had all these skeins of yellow yarn hanging around.

Body of Marshland completed and on to the sleeves

Since I am not crazy about this yarn, and generally I don’t like a pullover, I was knitting this for practice and to use up some yarn.

The Marshland is knit top down, with the ribbing at the neck added last. There is a long colorwork area on the yoke and chest that carries over to the sleeves. I changed it up a bit and tried to use up some stash yarn.

Picking up stitches is not something I am all that good at and when it came to doing so for the sleeves, I had to pick up and knit in pattern! I had changed the colorwork pattern, so had to follow my own changes to continue onto the sleeves.

What I Learned From Knitting the Marshland Pattern

This pattern is fairly easy to follow, but it needs short rows to raise the back. It seems there really is no front or back. The design seems to be meant as a knit for men. For that reason it is not super comfortable. I may add onto the neck.

Marshland pullover
Wearing my Marshland on a cool Florida day

I chose this pattern because of my yarn weight, but it’s not the prettiest pattern in the book – it’s manly. That is one reason I changed the colorwork.

The Arranmore yarn is also very strange. I have washed the sweater and I think it will take days to dry. I would not buy this yarn again, and it is discontinued I believe. No wonder.

In the end, the sweater fits, but I don’t like the bottom ribbing or the fact that the colorwork at the bottom of the body tends to pull in. It may block out.

I had trouble with the yoke increases and they still seem to be creating a lumpy row of stitches. That could block out too. On my first try, I added too many increases and had to rip out many rows.

This one is a “never knit again” but it’s mostly due to my yarn and the masculine look. I did not enjoy knitting three colors in one round either. I love Tin Can Knits and will try another pattern from the book one day.

Yarn Sale Drags Me In, Anzula and Key West Kotton

I can’t even remember how I got there, but once I was (online) strolling through Four Purls yarn shop I saw Anzula yarn on sale! Regular price, on average is $35 per skein, and I bought these three skeins for $24.15 each.

I believe I was searching for washable worsted yarn. Whatever, I snatched up these pretty colors: L-R, Temperance, Terra Cotta, and Seaside. I don’t have any project planned, but soon. Probably a hat or three.

Anzula For Better or Worsted yarn
Anzula on sale – couldn’t resist!

Four Purls also sells my favorite cotton yarn for making dishcloths. So I added more tropical colors to my stash. I’m making little cloths to give away at Christmas. Except for people who use sponges in the kitchen (yukko) they will be appreciated. See more colors in The Sassy Skein at Four Purls.

Worsted cotton yarn by The Sassy Skein in tropical colors
I needed new cotton yarn

Both types of yarn are favorites of mine. I first used a bit of Anzula for the Quince Wrap and fell in love. As is true for most nice yarn, it is pricey. I feel lucky to find a sale, and the yarn is really hard to find online these days, and colors are very limited. It may be due to Covid, I don’t know.

Four Purls offers free shipping on orders over $49 and the shop is close to me here in Florida so the package arrives in no time.

First Time Ripping Out Many Rows of Knitting

I’ve begun knitting the Marshland pullover sweater by Tin Can Knits – see the pattern link at the end of this page. The pattern is in the “Strange Brew” book. I chose this pattern because I had worsted weight yarn to use.

Something is wrong
I have too many stitches

Because the pattern colorwork looks to me like it was meant more for a man – it’s a unisex design, I decided to change up the knitting with other color patterns. The pink rows and the last yellow and green rows are different from the suggested pattern. However, all that was ripped back and I didn’t re-do it the same way.

The yellow Arranmore yarn was purchased to knit “Big Love” – a cardigan. That pattern was confusing, so I never knit it. I’m using other stash yarn, and some is not exactly the same weight as the Arranmore, but oh well.

How to unravel knitting mistakes
First time doing this – pick up right hand side of each knit stitch, all the way around. This will be the new starting row.

The “Make One” Rows

The pattern calls for places where M1 is needed – that is “make one” – and a stitch must be added. There is no suggestion about how to make a stitch, so you’d better have a favorite way! (HINT: Use the backwards loop method.)

On the very last increase row of the yoke, I somehow added too many M1’s and ended up with way too many stitches. I didn’t realize this, and kept knitting…. HINT / NOTE TO SELF: Count your stitches right after that last M1 row…!!!!!

In my photo above, my mistake row was in the brown section just below the pink. So I picked up stitches above the pink rows to start again. Everything below the needle was removed.

How to Rip Back Many Rows

I’ve never had to fix a knitting mistake as big as this one. I could not simply un-knit some stitches. I needed to rip many rows out. So I watched a couple of really bad videos, but the gist of it was to use a needle to pick up the right side of each V knit stitch. This has to be done slowly so none are missed. Also be sure you stay on the correct / same row!

But first, I pulled out the 32 inch needle I’d been knitting with – that gave me the ability to try on my sweater (very first photo). I used the same needle I’d been using to pick up the new stitches. I did this on a non-colorwork row because it was easiest. I began at the BOR marker and continued to the end. Now I had all new stitches on my needle.

Then I had to unravel all that previous knitting and rewind the balls. I was left with this (photo below) and ready to begin again. When I got to that M1 row where my error occurred, I used stitch markers to help me count.

Mistake removed and ready to knit again
Ready to try again

Below is the same yoke on my second knit. This time I followed the pattern’s suggested colorwork design. The sleeve stitches have been put on holders and all counts are perfect. So onward I knit!

Marshland yoke colorwork second try
This time I counted stitches

Stranded colorwork knitting is fun to do, and keeps a project interesting. Katie’s Kep, the Turkish Watchcap, and the Triple Patterned Watchcap were hats I enjoyed doing in Fair Isle, aka stranded colorwork. The only other sweater I knit like this is the Umpqua and it was my first sweater.

I’ve come across one row in the Marshland design where three colors were used, but all the others are two color strands.

Click here for the Marshland sweater pattern download at Ravelry.

More from the blog: