Tag: sweater

Discovering The Goodness of Icelandic Lettlopi Wool

The last thing you may expect a Florida gal to do is order wool from Iceland to knit a sweater! But that is just what I did a couple of weeks ago. I have now fallen in love with this wonderful Lopi wool.

Lettlopi wool skeins in white and blue
White and Air Blue Lettlopi yarn from Iceland

While living here in the jungle heat, I dream of being in a normal climate where seasons change and people wear sweaters, hats and mittens. My cold weather wardrobe is being knit with the hope that one day I will live in New Hampshire again.

I’ve come to love beautiful wool and appreciate knowing where my yarn comes from. Unlike many knitters, I never get to sit in front of a winter fireplace, happily knitting something I know I will need to stay warm. My knitting is mostly done in air-conditioned rooms with ceiling fans running. Fall doesn’t mean anything really to Floridians. Days do get cooler, but compared to the heat of summer, that means little really. Winter means some cold, damp mornings – we even get ice in the birdbaths occasionally – but snow never falls and temps usually warm up by mid-day.

It’s a boring place unless we get out on the water.

Florida neighborhood oak trees flat street
Live Oaks make a “tunnel” effect over the road where I walk in the morning.

Instagram For Knitters

I became interested in the Lopi yarns after seeing photos posted by knitters on Instagram. If you knit, you should set up an Instagram account (this link goes to my Insta account) and follow other people who knit. I’ve discovered new knitting patterns and sales on yarn (and patterns) from the site as well. I don’t do much on Instagram myself, except share a photo now and then, but I love to see what designers and yarn sellers have to offer.

Buying My Lettlopi Yarn

This has been my year for knitting sweaters. I have three pullovers on my needles at the present time- Calliope (finished!), Meadow Moon and Farfuglar (finished and knit with Lettlopi!).

Someone shared a photo, on Instagram, of a new sweater design using Lettlopi wool, and it was beautiful. I looked into the yarn further and ended up ordering from the Icelandic Store. I’d chosen a sweater pattern by Jennifer Steingass which used this yarn. The pattern, called Treelight, ended up being a pain in the neck to get started because of gauge. I gave up on it and found one in my new book, which I had ordered along with the yarn. The book, Lopi 40, is full of beautiful patterns and I have begun knitting “Farfuglar” meaning “Migrating birds”. (I finished this sweater in November and love it.)

Lopi 40 book of knitting patterns
Lopi 40 Book
Farfulglar sweater in blue and white Lettlopi yarn
Farfugla – finished!

A lot of Lopi yarn colors are out of stock, but I wanted light blue and white which were both available. I bought ten skeins of Air Blue and five skeins of white. I had to pay shipping, but the yarn itself was so cheap, compared to US stores, that I believe I got a good deal. The shipping process took over a week, but I was in no hurry.

Plotulopi Yarn

Another wool yarn that gets good reviews is Plotulopi. It is described as “unspun plates of Icelandic wool”. It is equal to a worsted weight and comes in lengths of 328 yards. At the Icelandic store each plate is about $5.. .which is a deal compared to ordering from US stores!

So my yarn plates have arrived, along with more Lettlopi, even though color selection in the Lettlopi was slim. The Icelandic Store is on the ball, and this shipment arrived very fast.

I have begun knitting a pair of mittens using the Wine Red Plotulopi. This yarn is unspun and that means it will pull apart very easily. I wondered how it would work while knitting colorwork! I did okay, except when I had to tug on an end that was hanging, and the red yarn came apart! I used a crochet hook to catch the short end piece and wove it in. It means being careful when knitting with this yarn.

So this yarn is a little weird, but it’s cheap, and I love the colors! They make up for all the missing Lettlopi shades that are out of stock.

Plotulopi wool yarn plates
plates of plotulopi wool yarn
Plotulopi plates of yarn
colorwork plotulopi and lettlopi yarn colorwork
Mitten in Lopi wool

Alafosslopi is The Bulky Yarn

By looking through the book, I discovered the heavier weight Alafosslopi yarn. It is a bulky yarn and is used to knit some wonderful sweaters that would be very warm. I have a pattern chosen to use this new bulky yarn, but many of those colors are also out of stock at this time. Since I had limited colors to choose from, I settled for Ecru Heather and ordered a box full of yarn.

This time the yarn was delivered much quicker, but I had to pay more for shipping. There was no choice and this may have to do with the size of the shipment, but I got the order very fast. AND… they kindly included a chocolate candy bar with my order! I have begun knitting the Carbeth Cardigan using this pretty yarn.

Alafosslopi yarn in ecru heather color
A little candy surprise in with my Alafosslopi yarn delivery!
Alafosslopi yarn in ecru heather color

Buying Lopi Yarn Online

Some places have the yarn to order in the US but the cost is about $5 more each skein! I’ll need about 13 skeins for the sweater I want to make. Webs yarn offers big discounts for bulk orders but at the present time, colors are scarce. For this reason I ordered directly from Iceland. The skeins are cheaper, much cheaper, but there is shipping to pay. Still, for me, it was worth it.

The Icelandic Store has very quick shipping. I also have ordered from the Nordic Store but haven’t had the best luck. They had a big sale going on and I placed an order only to find out a few days later that many of the yarn colors I ordered were out of stock. I was a little ticked off that nothing that showed as available was really available. So my preference is to order from the Icelandic Store.

I hope that more yarn is being created and we’ll have more color selections soon. Until then, I have plenty of nice yarn to play with.

Lots of Changes This Year

Writing a blog, sharing photos, and doing research and making links takes time. Lately I don’t think the time…

Something went wrong. Please refresh the page and/or try again.

Knitting The Calliope Sweater Pattern

Knitting has begun on my Calliope pullover sweater pattern (link to the pattern below).

Somehow I managed to pull a muscle in my neck which is causing me some extreme discomfort. The pain is keeping me from doing much of anything except sit in front of the television and knit. For that reason, my sweater is coming right along! We must take the good with the bad 😉

The Yarn Story

I’ve had the Miss Babs “Katahdin” green yarn for a long time now. The “Spring Clover” yarn is a Wild Iris – meaning they only made the color once – and the skein has 1750 yards of yarn..!! It’s made up of Bluefaced Leicester Wool and is Superwash. Originally, I thought I would use it to knit a large, rectangular stole for my daughter, then I decided not to.

So, this huge skein of yarn sat around until recently when my new idea was to pair it with mohair and knit a sweater.

Miss Babs Katahdin yarn and Filcolana mohair
Yarn is ready to knit

I ordered some dark green mohair to use, but after knitting up a swatch, decided I didn’t like the colors together. After trying the Katahdin with some leftover white mohair, and liking that combination better. I ended up buying the Filcolana Tilia mohair (link goes to Fairlight Fibers) in very light green called “Green Tea”.

Swatching for the Sweater

Using the size 7 US needles, I knit up a swatch to check for guage. Before the washing and drying of the swatch, the row counts were pretty exact. But after blocking, the knitting expanded to be slightly taller, so I will watch the length of my sweater. It’s not terribly off, so I stayed with the same size 7 needles. (I should have gone down a needle size because this sweater really grew!)

swatch knit for Calliope sweater
Before washing the swatch is very close to exact.
swatch for knitting a sweater
Swatch for Calliope, after washing

The Sweater Pattern is “Calliope” from Espace Tricot

Raglan sweaters are generally quite easy to knit and I’d already knit the Turtle Dove pattern offered by the same designers. That one was my first raglan knit, but it came out huge – more like a big poncho / blanket.

This pullover has texture at the yoke which is created by simple knits and purls. The pattern begins with a cast-on for the neck and is knit top-down. I decided not to include the mohair until I knit a few rounds. Something about fuzz at my neck turns me off.

Photographing knitwear projects, and getting the color right to share, can be difficult. For some reason this mint green color is exceptionally difficult to capture. GRRRRRR….. I promise, my sweater color is not that ugly!

short row shaping on Calliope sweater
Short rows are done, moving onto the raglan increases
front of sweater after short row shaping

Calliope has short row shaping using German Short Rows. They are explained in the pattern, and are very easy to do, and a link is provided to a video by Very Pink Knits for further explanation. Short rows give the sweater a better and more comfortable shape by raising up the back section (shown in my photo below). You can see that the front of the sweater (photo on the right above) has fewer knit rows after the short rows are completed.

Once that is accomplished, the raglan increases begin. This creates the sleeves and widens the front and back. My sleeve increases are easy to see in the photo above. I have just put the two sleeves onto waste yarn and will now continue to knit the body – round and round in stockinette.

Not Liking This Mohair

Body of sweater is done. It seems a bit big around. On to the sleeves, but the fuzziness of the mohair is quite annoying. Every time I knit, I end up with fuzz in my nose, mouth and eyes – like I am a magnet for it. I don’t know if it’s this type of Mohair, or all mohair which would do this. (I have since discovered Knitting for Olive Mohair, which is much better.)

Photographing this green has been a real pain in the neck! Finally I took the sweater, with one sleeve half knitted and the other on hold, and put it outside in the sun. The photos came out a bit better, but they are not true to the pretty green of this yarn.

calliope pattern sweater knitting
calliope pattern sweater knitting
calliope pattern sweater knitting
calliope pattern sweater knitting

The sleeves have a very long section of ribbing that runs down the arm from about the elbow area. I began that with DPN’s and switched to 9-in. circulars because I really don’t like using DPNs for long lengths of time.

Because I was working on this pattern alongside the Meadow Moon color-work pullover pattern, and also my Lettlopi “Migrating Birds” pullover, among other projects, the sweater was finally done three months after I began knitting.

Calliope Sweater End Results

The Calliope Sweater is quite an easy knit. The directions are well written, and mostly you are knitting, or knitting and purling. I chose the yarn from my stash because this past year has been a year of “no buying” (for the most part).

What I like, is the easy going style and the fact that most of this sweater can be knit at night while watching TV.

The sweater is big. Superwash yarn tends to do that, and that is why I usually avoid using it for sweaters. This is a good lesson in watching the gauge and changing needles accordingly – especially if using a Superwash yarn. I may toss it into the dryer one day to maybe shrink it a bit.

Espace Tricot used to offer all free patterns. They no longer do, but the patterns are nice even if you have to spend a few bucks. Recently, they came out with a classic raglan sweater called Gingerbread Sweater and it’s another that is most likely perfect for a beginner knitter.

Please keep reading….

Year-Round Camping in Florida; Enjoying Nature While I Knit

The peaceful days of camping in the wilderness go perfectly with knitting. What could be better than having coffee outside, with knitting on my lap? We camped twice in the last month and here is a look at the knitting projects I took along.

Pam's avatar by Pam

Pattern Review: Beginning the Magnolia Chunky Cardigan

I’m knitting a beautiful cardigan pattern by Camilla Vad. The Magnolia Chunky Cardigan is knit top-down with lace and bobbles on the body and sleeves. On this page I cover some issues I had in the beginning.

Pam's avatar by Pam

Knitting a Bohemian Version of the Marshland Sweater

This is my bohemian version of the Marshland sweater pattern by Tin Can Knits. The pattern is in their book “Strange Brew”.

Once again I am knitting with yarn I really don’t like all that much. I purchased this yellow Arranmore yarn when the color was on sale because it is / was discontinued. I planned to use it to make a different sweater (Big Love) and when that never happened, I had all these skeins of yellow yarn hanging around.

Body of Marshland completed and on to the sleeves

Since I am not crazy about this yarn, and generally I don’t like a pullover, I was knitting this for practice and to use up some yarn.

The Marshland is knit top down, with the ribbing at the neck added last. There is a long colorwork area on the yoke and chest that carries over to the sleeves. I changed it up a bit and tried to use up some stash yarn.

Picking up stitches is not something I am all that good at and when it came to doing so for the sleeves, I had to pick up and knit in pattern! I had changed the colorwork pattern, so had to follow my own changes to continue onto the sleeves.

  • Marshland in yellow
  • Colorwork pullover sweater Marshland pattern
    Before washing
  • Marshland sweater in yellow Arranmore yarn

What I Learned From Knitting the Marshland Pattern

This pattern is fairly easy to follow, but it needs short rows to raise the back. It seems there really is no front or back. The design seems to be meant as a knit for men. For that reason it is not super comfortable. I may add onto the neck.

Marshland pullover
Wearing my Marshland on a cool Florida day

I chose this pattern because of my yarn weight, but it’s not the prettiest pattern in the book – it’s manly. That is one reason I changed the colorwork.

The Arranmore yarn is also very strange. I have washed the sweater and I think it will take days to dry. I would not buy this yarn again, and it is discontinued I believe. No wonder.

In the end, the sweater fits, but I don’t like the bottom ribbing or the fact that the colorwork at the bottom of the body tends to pull in. It may block out.

I had trouble with the yoke increases and they still seem to be creating a lumpy row of stitches. That could block out too. On my first try, I added too many increases and had to rip out many rows.

This one is a “never knit again” but it’s mostly due to my yarn and the masculine look. I did not enjoy knitting three colors in one round either. I love Tin Can Knits and will try another pattern from the book one day.

First Time Ripping Out Many Rows of Knitting

I’ve begun knitting the Marshland pullover sweater by Tin Can Knits – see the pattern link at the end of this page. The pattern is in the “Strange Brew” book. I chose this pattern because I had worsted weight yarn to use.

Something is wrong
I have too many stitches

Because the pattern colorwork looks to me like it was meant more for a man – it’s a unisex design, I decided to change up the knitting with other color patterns. The pink rows and the last yellow and green rows are different from the suggested pattern. However, all that was ripped back and I didn’t re-do it the same way.

The yellow Arranmore yarn was purchased to knit “Big Love” – a cardigan. That pattern was confusing, so I never knit it. I’m using other stash yarn, and some is not exactly the same weight as the Arranmore, but oh well.

How to unravel knitting mistakes
First time doing this – pick up right hand side of each knit stitch, all the way around. This will be the new starting row.

The “Make One” Rows

The pattern calls for places where M1 is needed – that is “make one” – and a stitch must be added. There is no suggestion about how to make a stitch, so you’d better have a favorite way! (HINT: Use the backwards loop method.)

On the very last increase row of the yoke, I somehow added too many M1’s and ended up with way too many stitches. I didn’t realize this, and kept knitting…. HINT / NOTE TO SELF: Count your stitches right after that last M1 row…!!!!!

In my photo above, my mistake row was in the brown section just below the pink. So I picked up stitches above the pink rows to start again. Everything below the needle was removed.

How to Rip Back Many Rows

I’ve never had to fix a knitting mistake as big as this one. I could not simply un-knit some stitches. I needed to rip many rows out. So I watched a couple of really bad videos, but the gist of it was to use a needle to pick up the right side of each V knit stitch. This has to be done slowly so none are missed. Also be sure you stay on the correct / same row!

But first, I pulled out the 32 inch needle I’d been knitting with – that gave me the ability to try on my sweater (very first photo). I used the same needle I’d been using to pick up the new stitches. I did this on a non-colorwork row because it was easiest. I began at the BOR marker and continued to the end. Now I had all new stitches on my needle.

Then I had to unravel all that previous knitting and rewind the balls. I was left with this (photo below) and ready to begin again. When I got to that M1 row where my error occurred, I used stitch markers to help me count.

Mistake removed and ready to knit again
Ready to try again

Below is the same yoke on my second knit. This time I followed the pattern’s suggested colorwork design. The sleeve stitches have been put on holders and all counts are perfect. So onward I knit!

Marshland yoke colorwork second try
This time I counted stitches

Stranded colorwork knitting is fun to do, and keeps a project interesting. Katie’s Kep, the Turkish Watchcap, and the Triple Patterned Watchcap were hats I enjoyed doing in Fair Isle, aka stranded colorwork. The only other sweater I knit like this is the Umpqua and it was my first sweater.

I’ve come across one row in the Marshland design where three colors were used, but all the others are two color strands.

Click here for the Marshland sweater pattern download at Ravelry.

More from the blog: