Tag: Harrisville Designs

Knitting Project Review: Magnolia Chunky Cardigan

This sweater knitting project was a fun one. Although there were a few things to figure out, I recommend the pattern to any fairly experienced knitters out there.

The Magnolia Chunky Cardigan is a beautiful sweater design. It is offered by designer Camilla Vad, and you can find the pattern to buy here.

I like to read through the comments by knitters who have previously knit a pattern. In this case, I think it was very helpful. I wrote a blog post about this when I first began to knit the sweater in September.

My finished sweater is a size Large, knit using 1 + cones of Harrisville Designs Highland wool in color Suede.
Magnolia Chunky Cardigan hanging
Lace and bobbles and hem, with sleeve of Magnolia Chunky Cardigan
Back design of lace and bobbles
Yarn cone and sweater

These photos were taken in the early morning, before the bright Florida sun could interfere.

A Pattern That is Fun and … Quick

I don’t think I have ever said that a sweater pattern was a quick knit. I always see knitters saying this, and usually I completely disagree. Being quick while knitting is not something I care about. I knit for fun, and it’s not a race. But, this time was different.

The types of sweaters I have knit usually become more boring as I knit down the body. Sleeves are usually slow-going as well. Because this pattern gives us something to concentrate on toward the hem and cuffs, I was not bored.

The body, with the nupps (or bobbles) did take some time. That one row with double bobbles was super time consuming…! There was always something to look forward to when knitting this project.

The sleeves were the fastest sleeves I’ve ever knit. Yes, they are 3/4, so that helps. Also, it is worsted yarn on size 10 needles. This also helps. LOL … The lace before the cuffs is easy – with no nupps.

Mods I Made

I really only changed a couple of things while knitting this cardigan. I added about 3 extra rows after the sleeves and body division. This is a good place to make the body longer. The few rows I added didn’t make much of a difference.

The nupps, when I made them, didn’t look great. I practiced on some swatches and ended up doing bobbles instead. You can find the link to making Bobbles that Pop on my Ravelry page. They take more time, so it’s your choice.

Yarn

The yarn came from my stash. Like most knitters, I have a stash to use up. I loved the “Suede” color of the Highland Wool (Harrisville Designs) but I had purchased it on cones. The color is mostly gray, but with some brown. It’s so hard to capture the color, but trust me, it’s nice.

Cone yarn leftover from knitting the Magnolia Chunky Cardigan
Leftover Highland wool
Yarn cone and sweater
Sweater from a cone

Cone yarn is a bit different because it’s meant for weaving and machine knitting. Because of this, the yarn (I used) is thin and a bit stiff. Cones usually contain oil, which means the yarn needs to be washed well once the project is complete. Some people wind the yarn onto hanks and pre-wash it to remove the oil.

Below are photos of the lace part of the cardigan taken before and after being washed. It may be hard to tell, but after washing the fabric softened and filled out (bloomed). (The color comes out differently because of lighting.)

Magnolia Chunky Cardigan lace and bobbles before wash
Unwashed
Lace and bobbles and hem, with sleeve of Magnolia Chunky Cardigan
Washed

The Highland wool creates beautiful hand knits. It comes in skeins as well. Most buyers use the cone put up for weaving. The cones tend to be without knots and ends – just one very long strand (450 yards). I remember finding only one tiny knot when knitting from these two cones. And the knot was way at the end of the first cone.

Cost is another consideration when knitting a larger project, like a sweater. Sweater yarn usually costs me around $100, give or take, depending on the yarn. I knit the Magnolia Chunky Cardigan using less than 2 cones, and each cone cost $25.50. That is less than $50 for the yarn to knit this sweater. And the yarn is nice wool.

How I Washed My Sweater Knit From Cone Yarn

Washing a garment made from yarn on a cone takes a bit more effort. I am no expert, but most places I found for advice said to wash in hot, or very warm, water. (This could be a problem if you use cones for colorwork, or combine various colors in a garment. I’m not sure about colors running and bleeding together in warm water. The addition of vinegar can usually help, but I’m not sure about that in warm water. Please leave a comment if you have some experience with this.)

My sweater is all one color. I washed it twice using Woolite. Some people use shampoo, or dish detergent. Those first two washes were done in quite warm water. I couldn’t bring myself to use hot. I saw a lot of gray water in those washes, meaning something yucky was definitely coming out. I let the sweater soak for about 10 minutes each time.

I did a cool water rinse, and then a second. The last rinse was clear, and that is when I added the Eucalan (Amazon paid link) to soften the wool.

A Worthwhile Knitting Project

The Magnolia Chunky Cardigan is unique and beautiful. It’s not the fit that looks best on me, but I couldn’t resist giving it a try. It is an elegant sweater, and probably deserves to be knit with some very pretty (and probably expensive) yarn. But my choice of wool works too, and I’m very happy with the outcome. Now, to find buttons.

Knit / crochet buttons links:

Wearing the Magnolia Chunky Cardigan

Update: Since finishing (minus buttons) this sweater, I have been wearing it often. Thankfully, it’s “winter” weather here in Florida – at least for part of some days. I love the 3/4 sleeves, and the fabric is soft and warm. I love it!

Yarn Selections From Harrisville Designs For Two Sweaters

More yarn has been added to my stash. I do have patterns in mind for it, but of course buying is quicker than knitting.

After I finished knitting the latest Warm Up sweater, I knew I wanted to have another. The Warm Up is an easy pattern and is perfect for worsted weight yarn. I have a particular affinity for yarn that comes from a place I love.

Peace Fleece yarn now comes pre-washed and it is squishy and soft. I used three colors to knit my Warm Up #2. The red tones were something new for me. Usually I stick to more earthy and neutral colors.

I saw this yarn in person when I visited Harrisville Designs during a trip back to New Hampshire. I knew I wanted to knit more sweaters using it.

Peace Fleece wool yarn tag
Peace Fleece yarn label
Daylights wool yarn label by Harrisville Designs.
Daylights yarn label
Peace Fleece worsted in black Siberian Midnight color
Siberian Midnight colorway

Harrisville Designs is a yarn company located in an old mill in Harrisville, New Hampshire. I lived near enough to shop there, but at the time I knew nothing about this place. I wasn’t much of a knitter back then. I couldn’t wait to stop in when I was back in the area for a visit. But I need to buy the yarn online so I don’t get to see the colors in person.

Read MORe about Peace Fleece yarn here.

I don’t remember what happened, but as soon as I saw the Siberian Midnight colorway, I wanted it. The yarn is black with white specks throughout. I believed it would knit up into a pretty pullover.

Of course the yarn, in the Siberian Midnight colorway, was hard to find. It seemed to be sold out everywhere. Then I found it for sale at Firefly Fibers and bought enough for a new sweater project. They also had some Daylights yarn for sale, and I bought enough of that for a different sweater. I chose the colorway Chirp. I’m thinking I will try to knit a cable sweater with the lighter color.

Peace Fleece and Daylights yarn
Peace Fleece – worsted and Daylights -DK

I now have two new sweater patterns in my queue. I just need to find a cable pattern I think I can handle.

Keep Reading

Something went wrong. Please refresh the page and/or try again.

If at First You Don’t Succeed

Beginning to knit a new sweater pattern called Blueberry Vodka Lemonade, but I messed up and must begin again. It happens.

The motto, “If at first you don’t succeed, try try again” is one I have in mind after casting on for a new sweater, knitting a bunch, and then goofing up badly. I was so looking forward to knitting this new sweater, but I’m not as good a knitter as I had hoped! After knitting all the way through the entire neck ribbing of a new sweater pattern…. I ripped the whole thing out.

It was totally my fault and not the pattern. In fact, this pattern is written better than any I think I have ever knit. Everything is explained in detail, with stitch counts, measurements, etc. to help the knitter. I’ve never knit a pattern by this designer (info below) but wow, I’m impressed…!

sweater neckband
Starting over

I will be starting again, but it is disappointing to get so far and then mess up. I had no hopes of going back and picking up the rib stitches because the yarn is black and difficult for me to see. It’s part of knitting life to make mistakes… it’s how we learn to fix them, or learn to deal with inevitable re-starts.

The Pattern

This new sweater pattern is named Blueberry Vodka Lemonade and is a design by Thea Colman, who is also known as Baby Cocktails in the knitting world. I love the look of this pullover knit in raglan style, with split hem, and 3/4 sleeves. My last project (the Lakeland Tee) also had a split hem, and I really like the look.

The Yarns I Chose

I searched for a while before I settled on two yarn types I wanted to try. I’ve never used either before.

First, a beautiful black, fingering yarn by Sandnes Garn: Tynn Peer Gynt, which comes from Norway. It is really lovely.

The gorgeous turquoise blue yarn is color “Peacock” and is Shetland wool from Harrisville Designs. Another beautiful yarn, which is spun in New Hampshire. I have visited Harrisville Designs, as I lived in NH for many years.

The Shetland seems a bit heavier for a fingering weight. On the other hand the Peer Gynt seems pretty thin.

skeins of wool yarn Shetland by Harrisville Designs, color Peacock and black Sandnes Garn Peer Gynt.
New yarn order

The Swatches

Because the pattern calls for a size 5 needle for the main part of the knitting, I did two different swatches with that size. Both were too large. So, I knit up a shorter swatch with the black yarn using a size 4 needle. It was perfect. Usually I knit a larger swatch but I didn’t want to use up the yarn.

(I had to wind the Shetland, by hand over my knees, and it was very easy to do so.). The black yarn does not need winding. I pulled from the outside.

Knitting swatches drying
Swatches

Messing Up and Making Changes

I want to follow this pattern as it is written, so I used a needle one size larger for the neckband. I knit all the way through the set up row – for the raglan and then my issues began.

When I re-knit this, and I will soon, I plan to switch to the smaller (main) needle on that “knit around one row”. I found it difficult to switch needles while knitting short rows and making the lacy parts at the raglan. I kept getting confused as to which needle I should be using. This is probably just me and my inexperience.. AND the fact that I did something really stupid. When I made the short row turn, I began following the wrong part of the directions (mark your place !!!! – I’m yelling at myself here).

Once I did it incorrectly – with the yarn overs and such, I totally could not go back without making a mess. AND that dark yarn didn’t help … so difficult to see.

Before I gave myself some kind of stroke, I just pulled the needles out and said, “Oh well, I guess I’ll start over”. Keep calm and carry on… and all that. I’ll cast on again later today.

If you plan to knit this sweater, you will need to be good at yarn overs (YO) as that is how the open holes along the sleeves will be made. Purl Soho has a nice, short, to-the-point video to help with that. See it here if you need help: https://youtu.be/n6Bpde5wihE

cat and yarn image

More Knitting Stories on the Blog

Something went wrong. Please refresh the page and/or try again.

My Trip to Harrisville Designs in New Hampshire

Ever since learning that yarn I buy online is spun in a New Hampshire town near where I use to live, I’ve wanted to go back to the area and visit the shop.

I had the chance to do that while on a resent visit to New Hampshire. Harrisville Designs sells Brooklyn Tweed yarn, and a lot more, but the Brooklyn Tweed is spun at that location. See this similar view in their video.

Historic Harrisville, NH mill buildings
Driving up Main St. which leads to Harrisville Designs

Even though I did some knitting years ago when I lived in a town quite close to Harrisville, I knew nothing about types of yarn and never knit with Brooklyn Tweed. After I moved away, all I wanted to do was get back to the area and visit Harrisville Designs. The quaint town of Harrisville is known for all it’s brick mill buildings.

Building where Harrisville Designs is located
Building where Harrisville Designs is located

My daughter drove us to Harrisville on a beautiful, sunny day in March. Clumps of snow still dotted the ground and it was cold enough that I wore my Cobblestone Cardigan and Katie’s Kep.

We were still wearing face masks because of Covid, as were the women working in the store. Right away they commented on my hat, which I think stands out as a hand-knit. Then they asked about my sweater, which I said was knit with Brooklyn Tweed “Shelter” yarn. They were friendly, and we chatted a while about yarns and patterns through our masks.

Brooklyn Tweed yarn display Harrisville Designs store
Display of Brooklyn Tweed yarn

Because we visited Harrisville Designs on a weekend day, and it was a beautiful day, there were no other customers in the store. Most likely people were outside hiking and enjoying the sunshine. But, that gave my daughter and I the whole place to ourselves! What a wonderful place for a fiber crafter to visit.

Inside Harrisville Designs
Inside the store – look at those floors!

We dug through buttons which were displayed in cute little trays. We admired the hand knits displayed all over the store. My daughter always chose the most difficult-looking sweater patterns when picking out her favorites. She is not a knitter and laughed at the fact that I kept saying, “That looks difficult and over my head”.

I noticed a display of Sincycle yarn which I am familiar with. I have two skeins at home in Florida which I bought online. Because I have to fly back home at some point, I had to curtail my buying, but couldn’t resist purchasing a little skein of orange Spincycle.

Spincycle yarn for sale
Spincycle yarn for sale at Harrisville Designs

A loom was set up in the back of the store with sample weaving projects. Weaving needs were all displayed in this section. I’m not a weaver, but it gave me a chance to tell my daughter about my grandmother’s loom and how I remember seeing it in her tiny house, and then it was eventually moved to the barn. Her loom may have come from this store.

Weaving loom at Harrisville Designs
Weaving Loom

Harrisville Designs famous potholder kits were on display in the weaving section. (This is an affiliate link to Amazon, I may make a small percentage from a clickthrough)

Inside Harrisville Designs where a weaving loom is for sale
More looms and cones of yarn

When we were finished shopping, we took a walk over a path that gives a good view of the Mill buildings, both upstream and down. See the upstream photo at the beginning of this post and in the slideshow at the end. The place is quite picturesque, even in the usually dreary month of March.

Mill area downstream in Harrisville center
Downstream, more of the mill yard

After crossing the footpath we crossed Main Street to visit the historic Harrisville General Store. Apparently this is the oldest, continuous general store and has been in operation since 1838.

Inside was a counter with prepared food, some empty tables, shelves with food items, and a cooler section. No one greeted us and we were generally unimpressed. BUT, it is Covid times, so things may be different when it’s not.

Harrisville, New Hampshire general store
Harrisville general store

I could have gone nuts buying yarn and patterns in Harrisville Designs, but as I mentioned, I have to pack and fly in a few weeks. I yearn to be living in New Hampshire once again and places like this make me homesick. It was a lovely day spent with my daughter, and a good memory to hold onto.

More Harrisville Photos

  • Town of Harrisville, New Hampshire
    Brick mill buildings
  • Brick mill building of Harrisville Designs
  • Center of town, Harrisville New Hampshire
  • Historic Harrisville area with Harrisville Designs building
    Upstream, Harrisville Designs building and smaller building
  • Cozy nook inside Harrisville Designs
    Cozy nook inside

Video About Fabric and Crafts Which are Handmade at the Harrisville Mill